Welcome Guest! To enable all features please Login or Register.




Go to last post Go to first unread
Offline yidakimason  
#1 Posted : Thursday, November 26, 2015 9:36:47 AM(UTC)

Rank: Newbie


Groups: Registered
Joined: 11/26/2015(UTC)
Posts: 3

Hey folks, just getting into this world... I am researching small-batch gin stills to purchase.. My intention is to start with a still large enough to produce high quality/flavour gin, in quantities large enough to supply our friend base... Eventually, once i've cleared the learning curve, i'd like to step it up and start a small-scale craft distillery. I've had over a decade o homebrewing beer and wine, but havent dabbled into spirits yet, so i understand that i've got a lot to learn...

I seek advice on which equipment to purchase, to get high quality results, and reasonable efficiency to produce small batches in moderate quantity.. I've done a little research and seem drawn to the Brewhaus 15 gal, 4" flute with four chambers. Seems like a reasonable place to start, and may remain a usefull size later on when running distillery, as a small-batch still for testing recipes and experimentation. Any advice on this is appreciated

Along with that, i realize a heat source is needed( doesnt come with heating coils/ thermostat, like some other stills on market). I like the idea of using an induction element, are these good for this application, or is a submersible heating coil the best way to go?

Thanks again, i will be posting many more questions and appreciate any guidance

Offline lordWobbles  
#2 Posted : Thursday, August 10, 2023 11:35:48 AM(UTC)

Rank: Newbie


Groups: Registered
Joined: 8/9/2023(UTC)
Posts: 2

Ha, exactly the same questions as I wanted. 8 years and no answers, looks like we met to hunt elsewhere! How did you get on in the end? I wanted to know if an 8 gal kettle could support a 4 in flute
Offline admin  
#3 Posted : Monday, August 14, 2023 7:59:55 AM(UTC)

Rank: Administration


Groups: Administrators
Joined: 2/10/2002(UTC)
Posts: 493

Was thanked: 7 time(s) in 7 post(s)
While an 8 gallon kettle can support the 4" flute column it is not optimal because of the small volume for the large column. The cost difference is also very small between the 8 gallon and 15 gallon kettles, so I would suggest staying with the 15 gallon kettle and just reduce the volume of liquid for smaller test runs.

The other option is the 3" column, which can be multi-headed on a larger volume boiler as you move into commercial operations down the road. We have several small distilleries operating this way.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.